F139C-Puri High Purity Gas Dewpoint Transmitter

Product Advantages:Ultra-wide Range Measurement Range:-120 … +20 °Ctd

Leaflet
F139C-Puri is a dewpoint measuring instrument specially designed for high-purity gas conditions. It uses FIXINST-A, an ultra-fast response aluminum oxide sensor with innovative moisture sensitive materials and processes. It has extremely high sensitivity and stability and can accurately capture small moisture changes in the medium, stable measurement of humidity as low as ppb level, providing accurate and reliable key data for gas analysis, quality control and process optimization Revolutionary auto-calibration circuit design automatically compensates for measuring drift caused by temperature, contamination, and aging, providing long-term stability and high accuracy measurements Innovative temperature compensation algorithm and multi-point temperature compensation calibration, greatly improving the sensor’s temperature drift and ensuring high-precision dewpoint measurement over a wide temperature range The VCR process is used for connection, with high connection strength and good air-tight performance, is widely used for special gas or high purity gas pipelines
  • FixInst newly developed ultra-high sensitivity aluminum oxide sensor technology, lower limit of dewpoint down to -120 °Ctd, ppb level of humidity
  • MEMS based pressure sensor for simultaneous monitoring of dewpoint and pressure
  • Application in dewpoint < -80 °Ctd: High-purity industrial gas, electronic specialty gas and etc.
  • 10+ points of dewpoint calibration and multi-point temperature compensation provide accurate measurements up to ±2 °Ctd (Refer to “Technical Data”)
  • Ultra-fast response time and outstanding long-term stability
  • Anti-condensation, resistant to particulate contamination, oil vapor and most chemicals
  • High resistance to electrical disturbance
  • IP65 protection class, providing good protection even in harsh environments
  • Provides comprehensive sensor setup, data transfer, software upgrades, and maintenance via standard Modbus RTU (RS485) interface and powerful service APP
  • Calibration is valid for two years, reducing maintenance

Ideal for ultra-low dew point monitoring in high-purity industrial gases, electronic specialty gases, and semiconductor manufacturing, ensuring precise moisture control and gas purity.

Measuring Range

Dewpoint -120 … +20 °Ctd
Temperature -40 … +100 °C
Pressure 0 … 1.7 MPa(a)

Output

Analog Output (Customized)4 … 20 mA (3-wire)
Analog Resolution0.002 mA
Analog Drift0.01% of span/°C
Analog LoadMax. 500 ohm
Digital OutputModbus RTU (RS485)
Connector5pin M12, Female

Accuracy

Dewpoint (Air or Nitrogen)
+20 … -60 °Ctd±2 °Ctd (Standard)
-60 … -120 °Ctd±3 °Ctd (Standard)
Temperature (Customized)
0 … +50 °C±0.3 °C (Standard)
-40 … 0 °C & +50 … +100 °C±0.5 °C (Standard)
Pressure Accuracy± 0.3 %FS

Operating Environment

Environment Temperature-30 … +70 °C
Storage Temperature-40 … +80 °C
Relative Humidity0 … 95 %RH
Sample Gas Flow Rate> 1 L/min
Pressure0 … 1.7 MPa(a)

Response Time

Dewpoint: 63% [90%], Reference: 20 °C, 1bar(a), 4L/min
-50 → +20 °Ctd20 sec [40 sec]
+20 → -50 °Ctd1 min [3 min]
Pressure< 1 sec

Other

Process ConnectionVCR 1/4″ (Gas inlet/oulet)
Protection CodeIP65
Housing MaterialSUS304
EMCCompliant with IEC 61326-1

Power

Measuring State 10 … 30 VDC Max 1.5W @ 24VDC
Leaflet_F139C-Puri_Dewpoint-Meter_YUA_EN_2024-V3.01.pdf416 KB
Download ↓
QG_F139C-Puri_Dewpoint-Meter_YUA_EN_2024-V1.01.pdf386 KB
Download ↓

CONTACT

Please input your name
Please input Email
Please input Tel
Please input Company
Please input Business
Please input needs
Please fill in the above information accurately. We will contact you as soon as possible!
×

Write to Us

Tell us about your application and measurement requirements.
Our technical team will recommend the right solution.